砂土内微生物诱导碳酸钙结晶的检测方法研究

为了寻找砂土中微生物诱导碳酸钙结晶(MICP)过程的无损检测方法,采用3种粒径的砂子和两种浓度的胶结溶液进行了砂土的胶结试验,检测了砂土流出液的流量、p H值、尿素浓度和Ca2+浓度等化学指标变化情况,并对碳酸钙晶体的生成数量和分布进行了分析。试验结果显示:砂土流出液的流量和Ca2+浓度能够预测MICP过程中碳酸钙晶体的生成数量,p H值和尿素浓度能够预测MICP过程中尿素的水解程度;砂土中碳酸钙晶体的生成数量与注入的Ca2+总量呈现线性增长的关系,其线性系数可以通过砂土的粒径和胶结溶液的浓度表示,胶结后砂柱的碳酸钙分布并不均匀,小粒径的砂柱上部碳酸钙含量较高,而大粒径的砂柱下部碳酸钙含量较高。     

单组份聚氨酯炮孔填塞剂应用性试验

炮孔填塞是爆破施工过程中的一个关键环节,也是践行精细爆破设计理论的重要措施。传统的炮泥填塞存在着诸多不足,为此,研制了以聚氨酯为基材的TK炮孔填塞剂,通过大量基础性能研究和隧道现场工业性试验,论证了其作为炮孔填塞材料可降低炸药单耗,提高单循环进尺和炮孔利用率,减小空气冲击波、爆破噪声等有害效应的影响,且是安全可靠的。TK炮孔填塞剂优良的填塞效果、方便快捷的施工方法及显著的经济效益,方便于在爆破工程中推广应用。     

Living Materials Herald a New Era in Soft Robotics

Living beings have an unsurpassed range of ways to manipulate objects and interact with them. They can make autonomous decisions and can heal themselves. So far, a conventional robot cannot mimic this complexity even remotely. Classical robots are often used to help with lifting and gripping and thus to alleviate the effects of menial tasks. Sensors can render robots responsive, and artificial intelligence aims at enabling autonomous responses. Inanimate soft robots are a step in this direction, but it will only be in combination with living systems that full complexity will be achievable. The field of biohybrid soft robotics provides entirely new concepts to address current challenges, for example the ability to self‐heal, enable a soft touch, or to show situational versatility. Therefore, “living materials” are at the heart of this review. Similarly to biological taxonomy, there is a recent effort for taxonomy of biohybrid soft robotics. Here, an expansion is proposed to take into account not only function and origin of biohybrid soft robotic components, but also the materials. This materials taxonomy key demonstrates visually that materials science will drive the development of the field of soft biohybrid robotics.     

On the Barzilai-Borwein basic scheme in FFT-based computational homogenization

Building upon the equivalence of the basic scheme in the work of Moulinec and Suquet with gradient descent methods, we investigate the effect of using the celebrated Barzilai-Borwein step size selection technique in this context. We provide an overview of recent convergence theory and present efficient implementations in the context of computational micromechanics, with and without globalization. In contrast to polarization schemes and fast gradient methods, no lower bound on the eigenvalues of the material tangent is necessary for the Barzilai-Borwein scheme. We demonstrate the power of the proposed method for linear elastic and inelastic large scale problems with finite and infinite material contrast.     

In situ characterization of LiY(WO4)2 nanotubes for electrochemical energy storage

Here, LiY(WO₄)₂ nanotubes are prepared via a feasible electrospinning technique. This new anode material shows excellent electrochemical properties. The capacity loss of LiY(WO₄)₂ nanotubes is as low as 6.9% after 156 cycles, while bulk LiY(WO₄)₂ presents the capacity loss higher than 55.0%. Even after 600 long-life cycles, the capacity loss of the nanotubes is only 9%. It can be seen that the hollow structure with a rough surface and a porous morphology contributes to the improvement of electrochemical performance. Furthermore, online X-ray diffraction (XRD) method is firstly applied to understand the lithium ions insertion/extraction mechanism of LiY(WO₄)₂ nanotubes. It can be concluded that it is an asymmetrical two-phase reaction. A phase transformation from LiY(WO₄)₂ to Li₃Y(WO₄)₂ can be obviously seen from the in situ XRD during discharge process. While Li₂Y(WO₄)₂ appears as an intermediate phase with a reverse charge reaction. In addition, in situ XRD also demonstrates that LiY(WO₄)₂ nanotubes have surprised electrochemical reversibility. All the above results indicate that LiY(WO₄)₂ nanotubes can be expected to be anode candidate for rechargeable lithium ion batteries (LIBs).     

Transverse magnetoresistance peculiarities of thermoelectric Lu-doped Bi2Te3 compound due to strong electrical disorder

The n-type thermoelectric Bi_1.9Lu_0.1Te₃ was prepared by microwave-solvothermal method and spark plasma sintering. The magnetic field and temperature dependences of transverse magnetoresistance measured within temperature 2–200 K interval allow finding the peculiarities characteristic for strongly disordered and inhomogeneous semiconductors. The first peculiarity is due to appearance of linear-in-magnetic field contribution to the total magnetoresistance reflected in a crossover from quadratic magnetoresistance at low magnetic fields to linear magnetoresistance at high magnetic fields. The linear magnetoresistance can result from the Hall resistance picked up from macroscopically distorted current paths due to local variations in stoichiometry of the compound studied. The second peculiarity is that both linear magnetoresistance magnitude and crossover field are functions of carrier mobility which is in agreement with the Parish and Littlewood model developed for disordered and inhomogeneous semiconductors. An increase in the mobility due to a decrease in temperature is accompanied by an increase in the magnetoresistance magnitude and a decrease in the crossover field. Finally, the third peculiarity is related to the remarkable deviation of the total magnetoresistance measured at various temperatures from the Kohler's rule. Presence of strong inhomogeneity and disorder in the Bi_1.9Lu_0.1Te₃ structure concluded from the magnetoresistance peculiarities can be responsible for the remarkable reduction in the total thermal conductivity of this compound.     

Effects of temperature on creepage discharge characteristics in oil-impregnated pressboard insulation under combined AC–DC voltage

Due to the complexity of the valve side winding voltage of the converter transformer, the insulation characteristics of the oil-impregnated pressboard (OIP) of the converter transformer are different from those of the traditional AC transformer. The study on effect of temperature on the creeping discharge characteristics of OIP under combined AC–DC voltage is seriously inadequate. Therefore, this paper investigates the characteristics of OIP creepage discharge under combined AC–DC voltage and discusses the influence of temperature on creepage discharge characteristics under different temperatures from 70°C to 110 °C. The experimental results show that the partial discharge inception voltage and flashover voltage decrease with increasing temperature. The times of low amplitude discharge (LAD) decrease and amplitude of LAD increases. Simultaneously, the times of high amplitude discharge (HAD) gradually increase at each stage of creepage discharge with higher temperature. The analysis indicates that the charge carriers easily accumulate and quickly migrate directional movement along the electric field ahead of discharging. The residual charge carriers are more easily dissipated after discharging. The ‘hump’ region of LAD moves to the direction of higher discharge magnitude. The interval time between two continuous discharges is shortened obviously. The concentration of HAD accelerates the development of OIP insulation creepage discharge. The temperature had an accelerating effect on the development of discharge in the OIP under applying voltage.     

Template-assisted spray-drying method for the fabrication of porous particles with tunable structures

Developing strategies for the production of porous particles with controllable structures using a spray-drying method has attracted attention of researchers for decades. Although many papers have reported their successful production of porous particles using this method, information on how to create and control the porous structures as well as what parameters involving and what formation mechanism occurring during the synthesis process are still not clear. To meet these demands, the present review covers strategies in the spray-drying developments for the fabrication of porous particles with controllable structure. This information is important for optimizing the production of porous particles with desirable properties. Regulation of process conditions and precursor formulations are also explained, including composition, type, and physicochemical properties of droplet and raw components used (i.e., host component, template, and solvent). The electrostatic interactions between the individual components and the droplets are also presented, while this information tends to be neglected in the conventional spray-drying process. To clarify how the porous particles are designed, current experimental results completed with illustrations for the proposal particle formation mechanism are presented. The review also completed with the opportunities and potential roles of the changing porous structures in practical uses. This review would provide information on how to produce porous particles that can be used for advanced functional materials, such as catalysts, adsorbents, and sensors.     

三维颗粒物质的能量最小化模拟方法

颗粒物质是大量宏观颗粒的集合,广泛存在于自然界,日常生活和工业生产中.颗粒物质的运动表现出非常复杂的现象,如堵塞(jamming)等.颗粒物质体系的定量研究仍是一个巨大的挑战.本文采用能量最小化方法对颗粒物质进行准静态模拟.对一些典型的非线性优化方法,如共轭梯度法,拟牛顿法等,通过预条件来提高这些方法的效率.这些预条件方法基于颗粒体系的几何结构和能量函数来构建.通过对一些典型的准静态过程,如压缩和剪切试验的数值模拟,观察到对三维颗粒体系,预条件方法可以有40%左右的效率提升.     

Rubber's dissipated energy quantification used in vibratory insulation and protection systems

In vibratory protection and insulation systems, the major problem consist to choose suitable passive elements (spring, damper, others), which are inserted between the resonator and the exciter which have the role of preventing or reducing the transmission of dynamic forces. This work consists of characterizing a synthetic rubber (SR) sample of hollow circular shape (design requirement) by determining the coefficient of energy dissipation at an average ambient temperature of 20°C with a humidity of 25%. The mechanical load and discharge tests make it possible to draw hysteresis curves through which the dissipation coefficient will be determined, the load values is between 500 and 1000 N, with 30, 60, and 90 mm/min loading speeds and a number of cycles 2, 3, and 5, these values have been chosen so as not to cause the effect of cyclic hardening and softening and also to take into consideration, that the vibration limits movement at 3 cycles, which makes this test different from other tests such as fatigue. The processing of different curves, allows to determine energy dissipation coefficient of rubber specimen and also to examine its variation as a function of load, loading speed, and number of cycles; it is possible to determine other characteristics from this coefficient, such as, damping ratio, dynamic amplification factor, and so on, necessary to study efficiency of protection systems, design, and manufacture, based on the curve of transmissibility of dynamic forces to evaluate performance rubber conditions use.